Wise-Man Automation & Controls, Inc.

The SMCT302 - Telemetry Measurement and Control System, developed by Smar, is intended to monitor and to control industrial process variables in applications where the distances involved or the geographical conditions of the area makes it impractical to use cables.

The possibility of performing periodical measurements without the participation of operators,
The reduced cost when compared with conventional systems that make use of cables as the means of transmission, and
The possibility of using existing facilities such as telephone lines and transmission towers.

Besides the monitoring and control of process variables, the SMCT302 provides real time operation and maintenance, as well as status monitoring of all pieces of equipment involved in the process, which makes it possible to diagnose eventual failures in the system. All information collected by the SMCT302 are stored in a standard format data bank which may be used in reports, process optimization, statistic control and enterprise administration software.

The measurement of some quantity with the aid of intermediate means which permit the measurement to be interpreted at a distance from the primary detector. The process that measures a quantity and then transfers the measurement data to a remote location to be recorded, displayed, or to control a process. FCC Definition: "use of telecommunication for automatically indicating or recording measurements at a distance from the measuring instrument. Strictly speaking, "telemetry" is the information that is collected, and "telemetering" is the process that collects and transfers the information. Technology advances allow reduction in size and power requirements. In addition, high speed computers allow the use of complicated algorithms for detection, encryption, and coding (compression). International Foundation for Telemetering (IFT) Purpose "The purpose of the IFT is to promote and stimulate technical growth in the field of telemetering and its allied arts and sciences. A telemetering system includes all components that are used to measure, transfer, and analyze the data. Although not all of these components are present in every telemetering system, and some systems may include other components.				PROCESS CONTROL INSTRUMENTS- TELEMETERING Model: WM-TLMR-SMR-002 Absorption analyzers, industrial process type: e.g., infrared, X-ray Analyzers, industrial process type Annunciators, relay and solid-state types: industrial display Boiler controls: industrial, power, and marine type Buoyancy instruments, industrial process type mfg Chromatographs, industrial process type Combustion control instruments, except commercial and household furnace type Computer interface equipment for industrial process control Controllers for process variables: electric, electronic, and pneumatic Coulometric analyzers, industrial process type Data loggers, industrial process type Density and specific gravity instruments, industrial process type Differential pressure instruments, industrial process type Digital displays of process variables Draft gauges, industrial process type Electric and electronic controllers, industrial process type Electrodes used in industrial process measurement Electrolytic conductivity instruments, industrial process type Flow instruments, industrial process type Fluidic devices, circuits, and systems for process control Gas and liquid analysis instruments, industrial process type Gas flow computers, industrial process type Humidity instruments, industrial process type Hydrometers, industrial process type Infrared instruments, industrial process type Instruments for industrial process control Industrial process control instruments Level and bulk measuring instruments, industrial process type Liquid analysis instruments, industrial process type Liquid concentration instruments, industrial process type Liquid level instruments, industrial process type Magnetic flow meters, industrial process type Manometers, industrial process type Moisture meters, industrial process type Nuclear reactor controls Panelboard indicators, recorders and controllers: receiver type PH instruments, industrial process type Pneumatic controllers, industrial process type Potentiometric self-balancing instruments, except X-Y plotters Pressure gauges, dial and digital Pressure instruments, industrial process type Primary elements for process flow measurement: orifice plates Process control instruments, industrial Programmers, process type Pyrometers, industrial process type mfg Refractometers, industrial process type Resistance thermometers and bulbs, industrial process type mfg Temperature instruments: industrial process type, except glass and bimetal Thermal conductivity instruments, industrial process type Thermistors, industrial process type Thermocouples, industrial process type Thermometers, filled system: industrial process type mfg Time cycle and program controllers, industrial process type Transmitters of process variables, standard signal conversion Turbidity instruments, industrial process type Turbine flow meters, industrial process type Viscosimeters, industrial process type Water quality monitoring and control systems


SMCT302 Telemetry Measurement and Control System Model: WM-TLMR-SMR-001 The SMCT302 - Telemetry Measurement and Control System, developed by Smar, is intended to monitor and to control industrial process variables in applications where the distances involved or the geographical conditions of the area makes it impractical to use cables. Some of the chief benefits of the SMCT302 are: The possibility of performing periodical measurements without the participation of operators, The reduced cost when compared with conventional systems that make use of cables as the means of transmission, and The possibility of using existing facilities such as telephone lines and transmission towers. Besides the monitoring and control of process variables, the SMCT302 provides real time operation and maintenance, as well as status monitoring of all pieces of equipment involved in the process, which makes it possible to diagnose eventual failures in the system. All information collected by the SMCT302 are stored in a standard format data bank which may be used in reports, process optimization, statistic control and enterprise administration software.