 CIV200P
Current/Voltage Converter
Model: WM-SGCN-SMR-001
The CIV200P is a non isolated current to voltage
converter. This module allows work with a remote current input of 4 to 20 mA
signals generating an output signal that can be chosen via a jump to obtain
five different voltage signals.
Some Characteristics:
[Top]
|
|
| 4 to 20 mA or 0 to 5
kOhm (manual mode) |
|
|
|
| 0-9 Vdc; 0-12 Vdc,
0-16 Vdc or 0-20 Vdc. |
|
|
|
|
|
|
| 110 or 220 Vac
selectable |
|
|
|
|
|
|
|
|
Ambient Temperature Limits |
|
| 0 to 50 ºC (32 to
122 ºF) |
|
|
|
|
 FI302
Foundation Fieldbus to
Current Converter
Model: WM-SGCN-SMR-002
The FI302 converts a FIELDBUS
signal into a 4 to 20 mA signal. If the frequency converter does not have
FIELDBUS capability, the bus signal can be converted into a conventional 4
to 20 mA by the FI302. The FIELDBUS signal can, for example, be a request
from the bus to a frequency converter to set a conveyor speed to 3.4 ft/s.
This instrument has three
independent channels, which means that three 4 to 20 mA outputs are
available.
Some Characteristics:
[Top]
|
|
| FOUNDATION Fieldbus
on 31.25 kbit/s voltage mode according to IEC 61158-2 |
|
|
|
| Three 4 to 20 mA
current links, external supply and common ground |
|
|
|
|
External Output Supply
Voltage / 3-45 Vdc
|
|
|
|
|
|
|
|
|
|
|
|
|
Up to 20 Dynamically
Insatiable Function Blocks.
The Function Blocks available allow simple and complex
control strategies to be placed inside the field device,
making the field device an integral part of the control
system. In order to fully benefit from the Function Blocks in
the device a True Foundation Fieldbus system is recommended.
|
|
|
|
Using local
adjustment magnetic tool if device is fitted with LCD display.
Complete configuration possible using PC software interface.
|
|
|
|
|
|
|
Injected low copper
aluminum with polyester painting or 316 stainless steel housing
|
|
|
Process Temperature Limits |
|
-40 to 85 ºC (-40 to
185 ºF)
|
|
|
|
|
|
Hazardous Area Certification |
|
Explosion proof,
weather proof and intrinsically safe
|
|
|
|
Wall, panel, or 2"
pipe with optional bracket
|
|
|
|
Nominal: 0.80 kg;
Digital display adds: 0.13 kg;
Mounting bracket adds: 0.60 kg
|
|
FI303
Profibus PA to
Current Converter
Model: WM-SGCN-SMR-003
The FI303 is a converter mainly
intended for interface of a PROFIBUS PA system to control valves, or other
actuators. The FI303 produces a 4-20 mA output proportional to input
received over the PROFIBUS network.
The digital technology used in
the FI303 enables an easy interface between the field and the control room
and also includes several interesting features that considerably reduce the
installation, operation and maintenance costs. The FI303 has three outputs,
reducing the cost per channel.
Some Characteristics:
[Top]
|
|
| PROFIBUS PA, digital
only, complies with IEC 1158-2 (H1): 31.25 kbit/sand voltage mode
with bus power |
|
|
|
| Three 4 to 20 mA
current links, external supply and common ground |
|
|
|
|
External Output Supply
Voltage / 3-45 Vdc
|
|
|
|
|
|
|
|
|
|
|
|
|
Using local
adjustment magnetic tool if device is fitted with LCD display.
Complete configuration possible using PC software interface.
|
|
|
|
|
|
|
Injected low copper
aluminum with polyester painting or 316 stainless steel housing
|
|
|
Process Temperature Limits |
|
-40 to 85 ºC (-40 to
185 ºF)
|
|
|
|
|
|
Hazardous Area Certification |
|
Explosion proof,
weather proof and intrinsically safe
|
|
|
|
Wall, panel, or 2"
pipe with optional bracket
|
|
|
|
Nominal: 0.80 kg;
Digital display adds: 0.13 kg;
Mounting bracket adds: 0.60 kg
|
|
 FP302
Foundation
Fieldbus to Pneumatic Signal Converter
Model: WM-SGCN-SMR-004
In order to connect
existing valve actuators to a FIELDBUS system, SMAR developed a
FIELDBUS to pneumatic signal converter, with very low air consumption
and a very stable output signal. A 0 to 100% digital signal from the
FIELDBUS is converted into a 3 to 15 psi pneumatic signal according to
a characteristic curve selected by the user. Besides the normal PID
control function, linearization, master capability, alarms and
damping, the FP302 offers signal limitation and reversing and many
other features for valve actuation:
- Output signal: 3 to 15 psi;
- Supply pressure: 20 psi;
- Air consumption: 0.15 scfm (20 psi
supply pressure);
- The built-in volume booster allows
high air capacity (4 SCFM);
- Vibrating resistant;
- Can be mounted in any position;
- Accuracy: 0.4 % of the span.
Some
Characteristics:
[Top]
|
|
| Digital only,
Foundation Fieldbus, 31.25 kbit/s voltage mode with bus
power |
|
|
|
| 3-15 psi
(0,2-1,0 kg/cm²) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Up to 20
Dynamically Insatiable Function Blocks.
The Function Blocks available allow simple and
complex control strategies to be placed inside the field
device, making the field device an integral part of the
control system. In order to fully benefit from the
Function Blocks in the device a True Foundation Fieldbus
system is recommended.
|
|
|
|
Using local
adjustment magnetic tool if device is fitted with LCD
display. Complete configuration possible using PC
software interface.
|
|
|
|
18-22 psi
(1,2-1,5 kg/cm²)
|
|
|
|
|
|
|
Injected low
copper aluminum with polyester painting or 316 stainless
steel housing
|
|
|
Process Temperature Limits |
|
-40 to 85ºC (-40
to 185 ºF)
|
|
|
|
|
|
Hazardous Area Certification |
|
Explosion proof,
weather proof and intrinsically safe
|
|
|
|
Wall, panel, or
2" pipe with optional bracket
|
|
|
|
Nominal: 1.80
kg;
Digital display adds: 0.13 kg;
Mounting bracket adds: 0.60 kg.
|
|
|
FP303
Profibus PA to Pneumatic
Signal Converter Model: WM-SGCN-SMR-005
The FP303 is a converter mainly
intended for interface of a PROFIBUS system to a pneumatically actuated
control valve, or a positioner. The FP303 produces a 3~15 psi (0.2~1.0
kg/cm2 ) output proportional to an input received over the PROFIBUS PA
network.
The digital technology used in
the FP303 enables an easy interface between the field and the control room
and also includes several interesting features that considerably reduce the
installation, operation and maintenance costs.
Some
Characteristics:
[Top]
|
|
| PROFIBUS PA, digital
only, complies with IEC 1158-2 (H1): 31.25 kbit/sand voltage mode
with bus power |
|
|
|
| 3-15 psi (0,2-1,0
kg/cm²) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Using local
adjustment magnetic tool if device is fitted with LCD display.
Complete configuration possible using PC software interface.
|
|
|
|
18-22 psi (1,2-1,2
kg/cm²)
|
|
|
|
|
|
|
Injected low copper
aluminum with polyester painting or 316 stainless steel housing
|
|
|
Process Temperature Limits |
|
-40 to 85ºC (-40 to
185 ºF)
|
|
|
|
|
|
Hazardous Area Certification |
|
Explosion proof,
weather proof and intrinsically safe
|
|
|
|
Wall, panel, or 2"
pipe with optional bracket
|
|
|
|
Nominal: 1.80 kg;
Digital display adds: 0.13 kg;
Mounting bracket adds: 0.60 kg.
|
|
FR302
Fieldbus Relay
Model: WM-SGCN-SMR-006
FR302 is a Fieldbus device
that has two built-in relays making integration of Fieldbus and conventional
devices such as solenoids, on/off valves, electrical actuators, motors,
pumps, starters, etc. The FR302 Fieldbus Relay can be located at the field,
mounted close to the conventional output devices without the need to run the
conventional wiring to the control room. The FR302 is an integral part of
SYSTEM302 but also integrates into other systems supporting FOUNDATION™
Fieldbus.
An extensive
function block library enables the FR302 to perform logic and regulatory
control functions in the field integrating it to the control strategy with
other H1 Fieldbus devices on the same network. Insatiable function blocks
provide great flexibility in control strategy. Link master capability allows
the FR302 to work as a backup LAS for greater availability of network
communications.
One very
interesting application for FR302 is as interface for electrical actuators.
Any electrical actuator, including Smar series AD/AR/AL becomes a Fieldbus
actuator, making FR302 ideal in upgrades and plant reinstrumentations. The
PID Step block is ideal in these cases since it can modulate the valve
without the need for actual position feedback.
Some
Features:
- Discrete Output connected direct onto
FOUNDATION™ Fieldbus;
- Insatiable Function Blocks for regulatory
and discrete control in the field;
- Two built-in Solid State Relay Outputs;
- Designed for DC and AC loads;
- Mix Fieldbus with conventional devices;
- Reduce wiring cost;
- Network master capability.
Technical Characteristics:
[Top]
|
Communication
|
FOUNDATION™ Fieldbus, 31.25
kbits/s voltage mode
|
|
Current consumption quiescent
|
15 mA from Fieldbus network
|
|
Turn-on Time
|
Approximately 10 seconds.
|
|
Update Time
|
Approximately 0.5 second.
|
|
Humidity Limits
|
0 to 100% RH.
|
|
Indication
|
Optional 4½ digit LCD
indicator.
|
|
Temperature Limits
|
| Operation: |
-40 to
85ºC (-40 to 185 ºF) |
| Storage: |
-40 to 120ºC (-40 to
250 ºF) |
| Display: |
-10 to 60ºC (14 to
140ºF) operation
-40 to 85ºC (-40 to 185 ºF) without damage. |
|
|
Vibration Effect
|
Meets SAMA PMC 31.1.
|
|
Electro-Magnetic
Interference Effect
|
Designed to comply with IEC
801.
|
|
Hardware
|
Physical: according to IEC
61158-2 and conformity with the FISCO model.
|
|
Electrical
Connection
|
1/2-14 NPT, Pg 13.5 or M20 x
1.5.
|
|
Material of
Construction
|
Injected low copper aluminum
with polyester painting or 316 Stainless Steel housing, with Buna N
O-rings on cover (NEMA 4X, IP67).
|
|
Mounting
|
With an optional bracket can
be installed on a 2" pipe or fixed on a wall or panel.
|
|
Weight
|
Without display and mounting
bracket: 0.80 kg.
Add for digital display: 0.13 kg.
Add for mounting bracket: 0.60 kg.
|
 HCC301
Hart to Current Converter
Model: WM-SGCN-SMR-007
The HCC301 is a HART to Current
Converter converting a digital variable from the HART communication in an
analog current signal, allowing monitoring and controlling this variable. It
is an interface that helps the communication between the field and the
control room.
Some Characteristics:
[Top]
|
|
| Accuracy of the
variable converted will be 0.1 % of the span. |
|
|
|
| 0.2 % in the output
current from -40ºC to +85ºC. |
|
|
|
|
12 to 45 Vdc in the 4
to 20 mA. This voltage will supply the HCC301.
|
|
|
|
Via HART, passive
MAU and isolation of 1500 Vdc.
|
|
|
|
Updating of the read
variable within 120 ms.
|
|
 IF302
Current to Foundation
Fieldbus Converter
Model: WM-SGCN-SMR-008
If instruments with 4 to 20 mA
must be connected to the bus, the IF302 will help to integrate them into the
FIELDBUS system. Three input channels are available, which makes this
instrument very cost effective.
Some Characteristics:
[Top]
|
|
| 0-20 mA, 4-20 mA or
any within 0 and 20 mA. Reverse polarity protected. |
|
|
|
FOUNDATION Fieldbus
on 31.25 kbit/s voltage
mode according to IEC 61158-2 |
|
|
|
|
±0.03% of span for
4-20 mA, 0.005 mA for other spans
|
|
|
|
|
|
|
|
|
|
Up to 20 Dynamically
Insatiable Function Blocks.
The Function Blocks available allow simple and complex
control strategies to be placed inside the field device, making
the field device an integral part of the control system. In
order to fully benefit from the Function Blocks in the device a
True Foundation Fieldbus system is recommended.
|
|
|
|
Using local adjustment
magnetic tool if device is fitted with LCD display. Complete
configuration possible using PC software interface.
|
|
|
|
|
|
|
Injected low copper
aluminum with polyester painting or 316 stainless steel housing
|
|
|
Process Temperature Limits |
|
-40 to 85 ºC (-40 to
185 ºF)
|
|
|
|
|
|
Hazardous Area Certification |
|
Explosion proof,
weather proof and intrinsically safe
|
|
|
|
Wall, panel, or 2"
pipe with optional bracket
|
|
|
|
Nominal: 0.80 kg;
Digital display adds: 0.13 kg;
Mounting bracket adds: 0.60 kg.
|
|
IF303
Current to Profibus PA Converter
Model: WM-SGCN-SMR-009
The IF303 is a converter mainly
intended for interface of analog transmitters to a PROFIBUS system. The
IF303 receives a current signal, typically 4-20 mA or 0-20 mA, and makes it
available to the PROFIBUS PA network. The digital technology used in the
IF303 enables a single converter to accept three inputs and also provide
several types of transfer functions.
This provides an easy
interface between the field and the control room and also includes several
interesting features that considerably reduce the installation, operation
and maintenance costs.
Some Characteristics:
[Top]
|
|
| 0-20 mA, 4-20 mA or
any within 0 and 20 mA. Reverse polarity protected. |
|
|
|
| PROFIBUS PA,Digital
only, complies with IEC 1158-2 (H1): 31.25 kbit/s and voltage mode
with bus power |
|
|
|
|
0.03% of span for 4-20
mA, 0.005 mA for other spans
|
|
|
|
|
|
|
|
|
|
Using local
adjustment magnetic tool if device is fitted with LCD display.
Complete configuration possible using PC software interface.
|
|
|
|
|
|
|
Injected low copper
aluminum with polyester painting or 316 stainless steel housing
|
|
|
Process Temperature Limits |
|
-40 to 85ºC (-40 to
185 ºF)
|
|
|
Ambient Humidity Certification |
|
|
|
Hazardous Area Certification |
|
Explosion proof,
weather proof and intrinsically safe
|
|
|
|
Wall, panel, or 2"
pipe with optional bracket
|
|
|
|
Nominal: 0.80 kg;
Digital display adds: 0.13 kg;
Mounting bracket adds: 0.6 kg.
|
|
|