MOISTURE ANALYZER SYSTEM
This multi-purpose moisture meters are the perfect tools for home inspectors, contractors or flooring installers. Used with an external electrode these key instruments for identifying moisture problems with EIFS. These meters use insulated contact pins to penetrate through the cladding and determine the condition of the sheathing. This method helps the inspector identify the source of moisture intrusion, and determine if dry rot has occurred. These meters can also be used to test a wide range of other building materials.
 
   
Model MO-BD-2100
Provides actual moisture content readings in the range of 6% to 40% for wood and 0.2% to 6% for gypsum. A reference scale and colored LED indicators provide relative moisture readings in non-wood materials.
  • Digital Display.
  • Three separate scales for plaster/concrete, gypsum and wood.
  • Adjustable audible set point to alert the user when a pre-selected %MC has been reached.
  • Averages up to 50 accumulated readings
  • Built-in calibration check.

SPECIFICATIONS
 
Size: 7 - 1/2" x 1 - 3/4"
Weight: 1 lb 3oz.
Battery: 1 9V Alkaline
Warranty: 1 Year
 
Model MO-BD-10

The BD-10 uses the same accurate technology as the Model BD-2100 with a familiar analog readout. It covers the range of 6% to 40% moisture content on wood and a color-coded reference scale for comparative readings on non-wood materials.

SPECIFICATIONS

Size: 7 - 1/2" x 1 - 3/4"
Weight: 1 lb 3oz.
Battery: 1 9V Alkaline
Warranty: 1 Year

AVAILABLE ITEMS

Item Description
Digital Contractors Moisture Meters
Analog contractors Moisture Meters
Electrode for wood, plaster masonry, etc. Max. penetration of #2497/A-100 pins is 5/16"
Electrode for use on roofing, insulation EIFS, etc. Insulated pins read only at the tips. Max. penetration of #608 pins is 3-1/4"
 		  

STANDARD ELECTRODES

INTERCHANGEABLE WITH BD, J AND P SERIES
MOISTURE METERS

 

   
 

Item Description
Electrode 2-E Two pins, 5/16" penetration. Use on plaster, masonry, paper tubes, wood
 
Electrode 4-E Four pins, 5/16" penetration. Use on wood up to 1-1/2" thick.
 
Electrode 12-E Double-roller type. Use on a moving web of paper or textile.
 
Electrode 15-E Eight pins, 1/8" penetration. Use on veneer, cardboard, leather, paper.
 
Electrode 18-ES Two pins (insulated), 3-1/4" penetration. Use on heavy timber, poles and ties. Also available as type 18-ED with depth gauge.
 
Electrode 19-E Two blades, 5" long. Use on stacked paper and veneer.
   
Electrode 21-E Two pins (insulated), 3-1/4" penetration. Use on insulation and roofs
   

Electrode 22-E

 Two pins, 1/2" penetration. Use on platter, masonry and wood. Will also take #496, insulated pins; 1-1/16" penetration.
   

Electrode 26-ES

 Two pins, 1-1/16" penetration. Use to measure moisture content in wood at different levels of penetration without being affected by increasing contact between pins and wood. Ideal for shell and core tests, to detect moisture gradients and to test lumber with wet surfaces.