CONTROLLERS
CD600- Digital Controller Multi-Loop

Model: WM-CTRLS-SJKE-001

The CD600 is a powerful stand alone single station controller capable of simultaneously controlling up to 4 loops with up to 8 PIDs and more than 120 advanced control blocks. In order to program it, one could use either the multipurpose Hand-Held Terminal or the CONF600. The CONF600 is a microcomputer software for DOS systems which provides users with a user-friendly graphic interface.

  • Up to four independent control loops with up to eight PID functions.
  • 8 analog and 4 digital inputs, 8 analog and 8 digital outputs.
  • Built-in backup station for both analog and digital outputs.
  • 8-digit alphanumeric display and individual buttons for control operations.
  • Built-in 24 Vdc 160 mA power supply for up to 8 field transmitters.
  • High reliability surface mount technology.
  • More than 120 function blocks are available for user's programming.
  • Several pre-programmed control configurations including cascade, ratio, feed forward, split range, 3-element boiler feed water control, distillation column control and many more.
  • Configuration via microcomputer or Hand-Held Terminal.
  • Adjustment of control options through front panel.
 
DC302- Foundation Fieldbus Remote I/O

Model: WM-CTRLS-SJKE-002

The DC302 Fieldbus Remote I/O makes the integration of Fieldbus and conventional I/O easy. It is a single integrated easy to use piece of equipment including power, control, networking and I/O under one compact device requiring less panel space than other solutions. The DC302 is an integral part of SYSTEM 302 but also integrates into other systems supporting Foundation Fieldbus.

 

  
DFI302- Foundation Fieldbus Universal Bridge

Model: WM-CTRLS-SJKE-003

The DFI302 is a powerful multifunction hardware component integral to the modular SYSTEM302 that includes all the best-of-breed hardware and software you need to manage, monitor, control, maintain and operate your plant. The DFI302 throughout the plant is completely self contained and performs most of the functions required by a system and very few additional components are therefore required.

 

  
LC700- Programmable Controller

Model: WM-CTRLS-SJKE-004

Since 1978, Smar has been a powerful contributor in setting the pace for the evolution of technology in the automation field. New products and new ideas to bring solutions closer to the user's dream. The first 16 bit digital controller, the first transmitter with embedded PID control, the first commercial line of Fieldbus products for process automation. The LC700 now joins the family of Smar products setting up the bridge between process and manufacturing automation and Fieldbus. Just to make your job easier !

The CONF700 is a Windows based configurator for the LC700. Model: WM-CTRLS-SJKE-005

  • Compact and Totally Modular Concept
  • Program Retention with EEPROM (no more batteries to change)
  • 1024 Discrete Points and 256 Analog Points
  • Ready for Fieldbus Foundation and Profibus devices
  • Ladder Programming (IEC-1131)
  • Very Easy to Learn and Use Configurator (Win 3.1X, Win95, Win NT and 2000)
  • User Defined Function Capability
  • Remote I/O reduces wiring
  • OPC server for compatibility with virtually any process visualization software
  

JUMO iTron series

   Model: WM-CTRLS-SJKE-006

These controller series with universal programmable inputs consists of 5 models in 1/32, 1/16, 1/8 vertical and horizontal and 1/4 DIN. The controllers features with a 7-segment display, ramp functions, alarms, timer, input filter and self optimization.

JUMO dTron series

   Model: WM-CTRLS-SJKE-007

The compact microprocessor controllers dTron 04.1, 08.1 and 16.1 are used in a wide number of applications including industrial furnaces, plastics and packaging machinery. The controllers feature ramp function, profiling, external set-point, RS 485/422 interface, 2 alarms, up to 5 outputs.

JUMO Dicon series

   Model: WM-CTRLS-SJKE-008

Brand new for the next century DICON 400/500 and DICON 401/501. This new controller series features up to 6 outputs, 4 analog inputs, 8 alarms, math-and logic module, setup program, program editor and much more!!! This controller is extremely powerful and flexible.

JUMO mTron

  Model: WM-CTRLS-SJKE-009

mTron - decentralized automation system with controller module, input and output modules, communication module, logics module, operating unit and project design software. The modules are small smart units connected with each other through a LON-interface.
 Digital Indicating Controllers

Specifications:
. Accuracy : Higher value of ¡¾0.3% or 1digit(full scale)
. Scale : -1.999~+9.999, -1999~+9999 for mV, V, mA
. Input measuring & controlling cycle : 250ms
. Input filter function : FIR filter built-in
. Configuration backup : save by EEPROM
Features:
. Universal-input
. T Type : R, K, J, T, Pt100, mV
. A Type : mA, V
. Universal-output
. Free select output among relay, current(4~20mA), SSR drive by front key operation
. Self-diagnosis
. Scaling function automatic decimal point movement
. Key lock change function (inside DIP S/W)

Model: WM-CTRLS-SJKE-010


 

Model: WM-CTRLS-SJKE-011

  Digital Indicating Controllers 

Specifications:
. Scale : TC, RTD can be set in fixed scale mA, mV, volt can be set within the range of 1999~9999 decimal setting capable
. Accuracy : 0.25% (larger one out of 1 digit)
. Input measuring & controlling cycle : 100mS
. FIR filter built-in
. Display : 4digit red FND for PV
. 4digit greed FND for SV
. 10bar(RED) LED for 0.0~100.0% indication
Features:
. Multi-input function
. Converting function through 16bit A/D converter with high efficiency and high-accuracy
. Optimal mode selection function out of 5-control mode (PID, PD-ON/OFF, ON/OFF-PD)
. Multi-output by measured value (mA, SSR, RELAY) or 2nd output (option) by controlled output value
. Digital indicating controller which can control the system optimally under any condition
. Controlling the system with other equipments simultaneously by using of communication (RS422, RS485), REMOTE SP, AO(4~20mA)

Flow controller

Flow controller

 

Air Flow controller

Air Flow controller

 

Programmable Flow controller

Programmable Flow controller

   Level controller

Level controller

Model: WM-CTRLS-SJKE-012

Monitoring the flow speed by using a thermal dynamic technique. Without mechanical moving parts.

  

Model: WM-CTRLS-SJKE-013

Compact model. Monitoring sensors for air and gases.

  

Model: WM-CTRLS-SJKE-014

Compact model with analogue output and switching points. Monitoring sensors for fluids.

  

Model: WM-CTRLS-SJKE-015

Detects liquids, granules and powder. When the medium comes in contact with the sensor tip a switching signal is generated.